XSNANO NDA Diesel additive
How to choose the right product?
For diesel engine - NDA (Nano Diesel Additive)
For Petrol engine - NGA (Nano Gasoline Additive)
For all Oils - NLA (Nano Lubricant Additive) Engine, gear, hydraulics, diffs, auto trans, wet clutches etc
Unlike other additives, with XSNANO additives You only need one for fuel and one for all types of Oil. (engine, gear, diffs, hydraulics etc)
Use NDA or NGA (Fuel additive)
To improve fuel economy, To clean injectors and upper cylinder, To Raise octane in petrol and cetane in diesel, To remove carbon, To increase power, To reduce emissions, To remove fuel bug, To enhance performance, To prolong engine life,
If you have any questions Ph 07 38241653 or email email@example.com or see our FAQ page (Frequently Asked Questions)
For larger sizes and Bulk orders please contact our office.
Used at a ratio of 1;10,000 (One mil per ten litres of fuel). Improve Fuel consumption by up to 28%. Reduced Carbon Emissions (including but not limited to NOx, SO², PM) Environmentally friendly. Reduce harmful exhaust pollution by up to 98%. Reduced noise levels, Increases octane rating of petrol and cetane rating in diesel fuel by 4-8 RON (no need to buy High Octane fuel), Fuel will not suffer condensation and stratification. Extended maintenance intervals, Effectively inhibit or eliminates carbon deposits in the combustion chamber including the spark plug, fuel spray nozzle, injectors, inlet valves and exhaust valves, kills and controls diesel bug. Effectively cleaning colloid and impurities in the fuel system, so the fuel system will be cleaner and operate properly. Fewer maintenance costs, extending the engine's life. It works well for new and old engines, in all fuels and in all climates and seasons. No engine modification is required.
XSNANO NDA (for Diesel) NGA (for Petrol) and NLA (for all Oils)
XSNANO Fuel Saving Additive is a product that uses the latest technology in Nanoparticles. Through extensive research and study of the rearrangement of liquid nanoparticles, we are proud to present our safe, physical-based environmentally friendly product. It not only protects your engine, but reduces fuel consumption it also protects the environment. When added to your diesel or petrol at a ratio of 1; 10,000 the effects of our product are unmatched by others in the industry.
XSNANO Fuel Saving Additive uses the latest technology in nanoparticles, resulting in a thermodynamic stable product that is able to disperse itself evenly into nano-sized water droplets between the fuel molecules. Atomized by the injection nozzle into the chamber, prior to deflagration, these water droplets will experience a temperature higher than its boiling point, causing minute steam explosions. This process will cause the original fuel molecule to break up into clusters several hundred times smaller, allowing them to vaporize fully and in turn achieve complete combustion.
- Fuel-saving up to 28% for fuel
- Reduce harmful emissions and pollutants up to 98%
- Cleanses the entire fuel system of carbon residue and sediments up to 99%
- Increase engine power up to 34%
- Protects the engine and fuel system from oxidation and corrosion.
- Reduce maintenance costs.
- Extend your vehicle lifespan.
- Cleans injectors
- Prevents the spread of Diesel Bug
Directions for use.
Add XSNANO Fuel Saving Additive NDA at a ratio of 1; 10,000 to the tank before adding the Fuel. For example, 10ml of NDA treats 100 litres of diesel. Be sure to treat all fuel in the tank for first use. (If you only top up a 50ltr tank with 20 ltrs, you need to add 5 ml). Add XSNANO Lubricant Additive (NLA) at a ratio of 1; 1,000 (One mil per one litre of oil) to oil (All types of Oil including Engine, gear, hydraulic, auto etc)
After using our product, your vehicle may experience an increase in idle speed due to the restoration of its condition to an optimal level and also because fuel is burning fuller. Should your engine fail to re-calibrate itself automatically through the ECU. Kindly adjust it manually to the original level to maximize the effects of fuel savings and to bring it within the manufacturer’s application for rpm.
Older vehicles, high mileage or vehicles with dirty fuel system may not experience such as a significant level of fuel savings at an initial stage of use. This is due to the cleansing properties of the product. Continue using XSNANO for about 5 cycles and clean or change your fuel filter, as there may be insoluble sediments and residue due to the cleansing properties of the product. After which you will experience the full effects of our product as above 93% of your fuel system should be clean by then. There will be significant fuel savings and reduction of harmful emissions and pollutants by this stage.
For best results use our NDA (Diesel) or XSNANO NGA (Petrol) in conjunction with our XSNANO NLA Lubricant Oil Additive XSNANO product for an even greater improvement in emissions and efficiency.